How to Make a Home Assistant Dashboard Easier to Use One-Handed on a Phone

When you use Home Assistant on a phone, the best dashboard is not necessarily the one with the most information. It is the one that lets you do a frequent task—turn off a light, unlock the door, or start a scene—without stretching for a tiny control or opening several menus.

A useful Home Assistant mobile dashboard one handed layout puts a short list of high-priority actions within easy thumb reach, keeps less-used controls out of the way, and remains clear when you are walking through the house or carrying something. You do not need a custom theme or a wall-mounted tablet to get there. A separate, deliberately simple phone dashboard is often enough.

The exact screen layout depends on your phone, Home Assistant version, and dashboard configuration. Treat the steps below as a design method, then check the result on the device you actually use.

Start with the tasks you do most often

Before moving cards, write down the actions you want to complete quickly on your phone. Common examples include switching off a room’s lights, adjusting a thermostat, opening a garage door, or turning on an “away” scene. Separate these from occasional tasks such as editing automations or checking device diagnostics.

For a household, the everyday list might be “living room lights,” “all lights off,” and “set the house to sleep.” In a short-term rental, it might instead be “entry light,” “climate,” and a clear way to report that something is not working. A guest-facing dashboard should not expose the same controls as an administrator’s phone view; see our guide to building a Home Assistant dashboard for a short-term rental for that separate use case.

Keep the first screen focused. If a control is rarely used, it can live on another view or in the relevant room view. A phone dashboard is not an inventory of every entity in your installation.

Design around reach, not just screen size

On a large phone, the top corners can be awkward to reach with one hand. Place the most frequent actions in the lower portion of the initial screen where practical, and avoid making the user reach to a top navigation tab for every routine task. This is a starting point, not a universal “thumb zone”: hand size, grip, phone case, and whether someone is using the left or right hand all matter.

Home Assistant cards generally scroll with the page; they do not become fixed at the bottom just because they are important. So aim to keep the primary controls visible in the first screenful rather than assuming users will scroll to a bottom row. Check the layout in portrait orientation and with the app’s header and browser or system bars visible.

Keep the first view short

  • Put three to six genuinely frequent controls near the start of the view, rather than showing a long list of every light and sensor.
  • Use clear labels such as “Hall light” or “All lights off,” not abbreviations only the dashboard owner understands.
  • Group related actions, but leave enough spacing that neighboring controls are not easy to hit by mistake.
  • Move status information that does not affect an immediate decision—such as detailed energy history—below the main controls or to another view.

A simple sequence could be: an “At a glance” status card, a compact row or section of core actions, then room-specific controls. If your first view already requires several swipes, decide whether it is trying to serve too many jobs.

Build a dedicated phone view in Home Assistant

A separate dashboard or view lets you simplify the phone experience without removing useful detail from a wall tablet or desktop. The dashboard editor’s names and available layout options can change between releases, but the general workflow is consistent.

  1. Choose the phone’s starting dashboard. In Home Assistant, open the dashboard you want to use, then use the dashboard menu and edit controls to create or configure a compact dashboard. If you prefer to keep one dashboard, add a dedicated view for phone tasks instead.
  2. Give the view a clear name. “Mobile,” “Quick controls,” or “Daily” is easier to recognize than a view called “Test 2.” Choose an icon that helps distinguish it from room views.
  3. Use a single-column, phone-friendly arrangement. Avoid layouts that depend on several columns or side-by-side cards to make sense. They may compress or reorder on a narrow screen.
  4. Add only the high-use entities and actions. Use the visual editor to add cards, then preview the view on your phone. If you use YAML mode, make a backup or copy of the current configuration before editing.
  5. Set it as the default in the phone app if appropriate. Home Assistant’s Companion App settings can let you choose a default dashboard. The setting’s location may vary by app version, so look in the app’s settings for its dashboard or server options.

If the dashboard serves other people too, keep the phone view understandable without relying on personal knowledge. A house sitter should not have to guess whether a switch controls a lamp or a ventilation fan. Our guide to dashboards for guests and house sitters covers that audience in more depth.

Choose cards that make the action obvious

For common device controls, Home Assistant’s built-in Tile card is a practical place to start. It can show an entity’s state and provide a direct interaction, with additional features available for supported entity types. For example, a light tile can offer brightness control, while a cover tile can expose position controls. Configure only the features you expect to use on a phone; extra sliders and buttons can make a card busier without making it more useful.

Use a card that matches the action. A toggle is suitable for a light that is safe to switch on and off. A garage door or door lock deserves more deliberate treatment, because an accidental tap can have consequences. Make the device and action explicit, and consider whether a confirmation step or a separate detail view is appropriate for your setup.

Do not rely on color alone to communicate status. Pair color with a readable name, icon, or state label. This helps in bright light, for people who perceive colors differently, and when the phone is set to a different display mode. The W3C explanation of WCAG 2.2 target-size guidance gives a 24-by-24 CSS pixel minimum in many cases, with exceptions; its enhanced criterion uses 44-by-44 CSS pixels. These are web accessibility criteria, not a guarantee that a control will feel comfortable on every phone. Favor generous, well-spaced touch targets when your card layout allows it.

Use labels and grouping to prevent wrong taps

Entity names that make sense in the Home Assistant entity list may be poor phone labels. “light.kitchen_counter_2” is useful to an integrator; “Counter lights” is easier to scan in a hurry. Rename entities or set appropriate friendly names where that makes the dashboard clearer, while keeping your underlying naming scheme consistent enough to maintain.

Group controls by the way people act, not necessarily by how devices are wired. A “Leaving” group might contain a scene and a few checks. A “Night” group could hold bedroom lights and a bedtime scene. Keep any action with a meaningful safety or security impact distinct from routine toggles.

There is no single correct choice between room-based and task-based views. Room-based views are easy to understand when someone knows where a device is; task-based views can be quicker for actions that span several rooms. If you are unsure, compare the trade-offs in our guide to room-based and task-based dashboard layouts.

Test the dashboard in ordinary conditions

Do not judge the layout only while sitting at a desk with the editor open. Try it one-handed, in portrait orientation, while standing where you would normally use it. Check whether the first action is obvious, whether the labels remain readable, and whether you can tap a control without covering the information you need.

  • Test both hands. Some users switch hands, and controls near one lower corner may be harder to reach from the other.
  • Test a narrow screen. Check that labels do not wrap awkwardly and that cards do not create horizontal scrolling.
  • Test slow or failed devices. A control should make its current state clear if a device takes time to respond or is unavailable.
  • Test the consequence of a mis-tap. Confirm that sensitive actions are not placed next to frequently used toggles.
  • Ask someone else to try it. A family member or staff member can reveal unclear names and hidden assumptions quickly.

In a small property-management business, for example, staff may use a phone between guest turnovers to check a lock, adjust heating, or switch off lights. A compact dashboard can reduce unnecessary navigation, but it should not replace access controls or operational procedures. Give staff only the controls they need, and make the intended action unmistakable.

Common problems and practical fixes

The important controls still require scrolling

Remove or relocate low-priority cards from the first view. If a chart, media player, and room list all compete for the top of the screen, split the dashboard into a quick-control view and supporting views. Resist shrinking text just to squeeze more in.

The dashboard feels crowded

Reduce the number of visible features on each card, use concise but clear names, and add separation between unrelated groups. A compact card is not automatically easier to use if it creates tiny tap targets.

Controls move or look different on the phone

Responsive layouts can change how cards are arranged at different widths. Preview and test the actual mobile view after significant edits, especially if you use a custom layout or cards installed through a community store. Keep a simpler built-in-card version available if a custom card breaks after an update.

A control is hard to reach at the top of the app

Move the action into the main view instead of depending on the sidebar or a top-level navigation control. For frequently used actions, a dedicated quick view may be more dependable than adding more navigation layers.

FAQ

Should I make a separate Home Assistant dashboard for my phone?

It is useful when your desktop or wall dashboard contains more detail than you want on a small screen. A separate dashboard also lets you choose a simpler default view without changing what other users see.

How many controls should be on the first screen?

There is no fixed number. Start with the few actions you use repeatedly, then remove anything that makes the primary controls harder to find. The first screen should be scannable without a long scroll.

Can I pin Home Assistant controls to the bottom of the screen?

Built-in dashboard cards are not generally a fixed bottom control bar. Keep key actions visible in the initial view instead. Custom cards or interface modifications may offer other behavior, but they add complexity and can need maintenance after updates.

Are Tile cards the best choice for every device?

No. They are a convenient built-in option for many common entities, but a more specialized card or a simple button may suit a particular device better. Choose based on the action people need and test the result on your phone.

Should I put locks and garage doors on a one-handed dashboard?

Only if quick access is useful and the controls are presented carefully. Use unmistakable labels, avoid placing them beside easy-to-mis-tap toggles, and consider the risks and confirmation options for your devices and household.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *